Differences

This shows you the differences between two versions of the page.

--- asterx-m2 [2026/03/27 21:46] – admin
+++ asterx-m2 [2026/03/28 13:57] (current) – [Photos] admin
@@ Line 1: / Line 1: @@
 ====== Septentrio AsteRx-m2 UAS ======
+++++ Linux USB connection info |
+The USB interface on the AsteRx-m2 has a //lot// going on. There are two ACMs, a mass storage device that enumerates empty by default (like a card reader with no card inserted, to present a volume to the host, set ''setUMSDOnConnect'' to true((Note that doing so will cause the SD card to be unmounted from the AsteRx))), a USB networking interface using the RDNIS driver, a device 'uas' (not sure what that is), and an emulated CD-ROM which contains a copy of the USB driver installer for windows.
+The default firmware brings up the USB port as 1.1 which is fine for basic use, but gets bogged down quickly. It can be set to USB 2.0 by uploading ''AsteRx-m2_USB_2_0.suf'' at one of the various firmware upload interfaces. It is in [[:septentrio:asterx-m2:files:asterx-m2-fwp-v4.8.2_0.zip|asterx-m2-fwp-v4.8.2_0.zip]] and applying it will cause the unit to reboot.
 === USB Port dmesg ===
@@ Line 36: / Line 42: @@
 Bus 003 Device 012: ID 152a:85c0 Thesycon Systemsoftware & Consulting GmbH Septentrio USB Device
 </code>
+++++
+==== Photos ====
+{{gallery>:septentrio:asterx-m2_uas:photos}}