Nokia FYGM HDMI Pinout
Signal descriptions:
- GPS_TIME_IN_H, GSM_FC_IN_H, GPS_TIME_IN_L, GSM_FC_IN_L: serial datafrom GPS to CPU or GSM Frame Clock input; RS422/485 differential
- SingleEndedIn: REF2M_IN REF10M_IN Accepts TTL/CMOS and SINE from -6 to+13 dBm. Input impedance is approximately 75 Ohm, Reduced swing TTL resultingfrom TTL-Gate plus 75 Ohm source termination is OK, too.
- NC: No Connection
- GPS_PPS_IN_H, GSM_FN_IN_H, GPS_PPS_IN_L, GSM_FN_IN_L: PPS pulsefrom GPS or GSM Frame Number input; RS422/485 differential
- GPS_CONTROL_H, GPS_CONTROL_L: Serial data form CPU to GPS; RS422/485differential.
- GPS_PWR, GPS_PWR_RET: GPS power supply: 50 mA at 15 to >35 VGPS_PWR_N might not be isolated from GND but cannot be relied upon to be thesame.
| Pin | Signal | Notes |
|---|---|---|
| 1 | GPS_TIME_IN_H | UART from GPS |
| 2 | SingleEndedIn | |
| 3 | GPS_TIME_IN_L | UART from GPS |
| 4 | GND | |
| 5 | NC | |
| 6 | GND | |
| 7 | GPS_PPS_IN_H | PPS Pulse |
| 8 | NC | |
| 9 | GPS_PPS_IN_L | PPS Pulse |
| 10 | GPS_CONTROL_H | UART input to GPS |
| 11 | GND | |
| 12 | GPS_CONTROL_L | UART input to GPS |
| 13 | GND | |
| 14 | NC | |
| 15 | GPS_PWR_RET | 15-35v |
| 16 | GND | |
| 17 | GND | |
| 18 | GPS_PWR | 15-35v |
| 19 | NC |
