wiki.millerjs.org

User Tools

Site Tools

atgm336h

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
atgm336h [2024/12/30 08:50] – [Table] 113.161.34.115atgm336h [2024/12/30 08:51] (current) – [Table] 113.161.34.115
Line 14: Line 14:
 The ATGM336H can largely be manipulated by sending PCAS commands, the documentation for which are supported is very sparse. Most of these I have captured from the GNSSToolKit application. Without GNSSToolKit, one can echo these commands directly to the device. The ATGM336H can largely be manipulated by sending PCAS commands, the documentation for which are supported is very sparse. Most of these I have captured from the GNSSToolKit application. Without GNSSToolKit, one can echo these commands directly to the device.
  
-^ Description         ^ PCAS             ^ Command                                          ^ +^ Description         ^ PCAS             ^ Command                                         ^ 
-| save configuration  | $PCAS00*01       | ''echo -en '$PCAS00*01\r\n' > /dev/ttyUSB0''     | +| save configuration  | $PCAS00*01       | ''echo -en '$PCAS00*01\r\n' > /dev/ttyUSB0''    | 
-| hot restart         | $PCAS10,0*1C     | ''echo -en '$PCAS10,0*1C\r\n' > /dev/ttyUSB0''   | +| hot restart         | $PCAS10,0*1C     | ''echo -en '$PCAS10,0*1C\r\n' > /dev/ttyUSB0''  | 
-| cold restart        | $PCAS10,2*1E     | ''echo -en '$PCAS10,2*1E\r\n' > /dev/ttyUSB0''   | +| cold restart        | $PCAS10,2*1E     | ''echo -en '$PCAS10,2*1E\r\n' > /dev/ttyUSB0''  | 
-| factory reset       | $PCAS10,3*1F     | ''echo -en '$PCAS10,3*1F\r\n' > /dev/ttyUSB0''   | +| factory reset       | $PCAS10,3*1F     | ''echo -en '$PCAS10,3*1F\r\n' > /dev/ttyUSB0''  | 
-| stationary mode     | $PCAS11,1*1C     | ''echo -en '$PCAS11,1*1C\r\n' > /dev/ttyUSB0''   | +| stationary mode     | $PCAS11,1*1C     | ''echo -en '$PCAS11,1*1C\r\n' > /dev/ttyUSB0''  | 
-| GPS Only            | $PCAS04,1*18     | ''echo -en '$PCAS04,1*18\r\n' > /dev/ttyUSB0''   | +| GPS Only            | $PCAS04,1*18     | ''echo -en '$PCAS04,1*18\r\n' > /dev/ttyUSB0''  | 
-| BSD Only            | $PCAS04,2*1B     | ''echo -en '$PCAS04,2*1B\r\n' > /dev/ttyUSB0''   | +| BSD Only            | $PCAS04,2*1B     | ''echo -en '$PCAS04,2*1B\r\n' > /dev/ttyUSB0''  | 
-| GPS+BDS             | $PCAS04,3*1A     | ''echo -en '$PCAS04,3*1A\r\n' > /dev/ttyUSB0''   | +| GPS+BDS             | $PCAS04,3*1A     | ''echo -en '$PCAS04,3*1A\r\n' > /dev/ttyUSB0''  | 
-| GPS+GLONASS         | $PCAS04,5*1C     | ''echo -en '$PCAS04,5*1C\r\n' > /dev/ttyUSB0''   | +| GPS+GLONASS         | $PCAS04,5*1C     | ''echo -en '$PCAS04,5*1C\r\n' > /dev/ttyUSB0''  | 
-| 115200 Baud         | $PCAS01,5*19     | ''echo -en '$PCAS01,5*19\r\n' > /dev/ttyUSB0''   | +| 115200 Baud         | $PCAS01,5*19     | ''echo -en '$PCAS01,5*19\r\n' > /dev/ttyUSB0''  | 
-| 0.2 Hz              | $PCAS02,5000*2A  | "echo -en '$PCAS02,5000*2A\r\n' > /dev/ttyUSB0"  |+| 0.2 Hz              | $PCAS02,5000*2A  | echo -en '$PCAS02,5000*2A\r\n' > /dev/ttyUSB0   |
  
 Some configuration parameters do not have PCAS values and must be sent as raw hex. Some configuration parameters do not have PCAS values and must be sent as raw hex.
atgm336h.1735548624.txt.gz · Last modified: by 113.161.34.115
Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki