atgm336h
This is an old revision of the document!
Table of Contents
ATGM336H
The ATGM336H GNSS receiver is a Chinese ublox MAX-M8 type clone, suitable even as a drop in replacement.
GNSSToolKit
Making Adjustments
The ATGM336H can largely be manipulated by sending PCAS commands, the documentation for which are supported is very sparse. Most of these I have captured from the GNSSToolKit application. Without GNSSToolKit, one can echo these commands directly to the device.
| Description | PCAS | Command |
|---|---|---|
| hot restart | $PCAS10,0*1C | |
| cold restart | $PCAS10,2*1E | |
| factory reset | $PCAS10,3*1F | |
| stationary mode | $PCAS10,2*1E | |
| GPS Only | $PCAS04,1*18 | echo -en '$PCAS04,1*18\r\n' > /dev/ttyAMA0 |
| 115200 Baud |
atgm336h.1672332839.txt.gz ยท Last modified: 2024/11/14 02:30 (external edit)