wiki.millerjs.org

[Home] [Cat] [About] [Syntax] [Scraps]

[millerjs.org]

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== DS3231 on Raspberry Pi ======
===== Enable i2c =====
in /boot/config.txt

<code>
dtparam=i2c_arm=on
</code>

reboot

===== Install Requirements =====
<code>
sudo apt-get install python-smbus i2c-tools
</code>

===== Confirm Presence =====
<code>
sudo i2cdetect -y 1
</code>

<code>
     0  1  2  3  4  5  6  7  8  9  a  b  c  d  e  f
00:          -- -- -- -- -- -- -- -- -- -- -- -- -- 
10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 
20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 
30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 
40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 
50: -- -- -- -- -- -- -- 57 -- -- -- -- -- -- -- -- 
60: -- -- -- -- -- -- -- -- 68 -- -- -- -- -- -- -- 
70: -- -- -- -- -- -- -- --  
</code>

===== Add Overlay =====
to /boot/config.txt

<code>
dtoverlay=i2c-rtc,ds3231
</code>

reboot


===== Confirm Use =====
<code>
sudo i2cdetect -y 1
</code>

<code>
     0  1  2  3  4  5  6  7  8  9  a  b  c  d  e  f
00:          -- -- -- -- -- -- -- -- -- -- -- -- -- 
10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 
20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 
30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 
40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 
50: -- -- -- -- -- -- -- 57 -- -- -- -- -- -- -- -- 
60: -- -- -- -- -- -- -- -- UU -- -- -- -- -- -- -- 
70: -- -- -- -- -- -- -- --  
</code>

===== Disable Fake hwclock =====

<code>
sudo apt-get -y remove fake-hwclock &
sudo update-rc.d -f fake-hwclock remove &
sudo systemctl disable fake-hwclock
</code>

===== Re-Enable Real hwclock =====
edit 

<code>sudo nano /lib/udev/hwclock-set</code>


comment these lines: 

(7,8, 9)

<code>
if [ -e /run/systemd/system ] ; then
 exit 0
fi
</code>

29:

<code>/sbin/hwclock --rtc=$dev --systz --badyear</code>

32:

<code>/sbin/hwclock --rtc=$dev --systz</code>

reboot

====== Reading the Temperature Sensor ======
The folks that designed the DS3231 were very kind and made the temperature registers user-readable, so we can use it as a thermometer! How neat is that! The temperature is stored in registers 0x11 and 0x12 and is reported in 0.25ºC increments, though keep in mind the sensor is only accurate to ±3ºC. [[https://www.raspberrypi.org/forums/viewtopic.php?t=59808#p956491|This forum post]] includes a sample python script that reads those registers and displays the output. It needs to be run with root privileges, and it will briefly unload the RTC kernel module in order to access the device, though this shouldn't matter given how quickly it runs.

===== Sensors =====
lm-sensors includes a driver that can read the DS3231's temperature sensor. Install the lm-sensors package, then run 'sensors'.

<code>
ds3231-i2c-1-68
Adapter: bcm2835 (i2c@7e804000)
temp1:        +30.8°C

cpu_thermal-virtual-0
Adapter: Virtual device
temp1:        +48.9°C
</code>

===== Directly =====
<code>cat /sys/class/i2c-dev/i2c-1/device/1-0068/hwmon/hwmon2/temp1_input</code>

===== Python =====
<code>
import smbus
import os

bus = smbus.SMBus(1)
address = 0x68

os.system('sudo rmmod rtc_ds1307')
def getTemp(address):
   byte_tmsb = bus.read_byte_data(address,0x11)
   byte_tlsb = bin(bus.read_byte_data(address,0x12))[2:].zfill(8)
   return byte_tmsb+int(byte_tlsb[0])*2**(-1)+int(byte_tlsb[1])*2**(-2)

#print getTemp(address)
Celsius = getTemp(address)
Fahrenheit = 9.0/5.0 * Celsius + 32
print Fahrenheit, "*F /", Celsius, "*C"
os.system('sudo modprobe rtc_ds1307')
</code>

Save as a .py file (e.g. ds3231_temp.py) and run with ''sudo python ds3231_temp.py''

You may need to install ''python-smbus''.
[Home] [Cat] [About] [Syntax] [Scraps] [millerjs.org]

[Home] [Cat] [About] [Syntax] [Scraps]

[millerjs.org]
