User Tools

Site Tools


edgegateway3002


Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
edgegateway3002 [2023/02/24 18:17] – [Specs] millerjsedgegateway3002 [2024/11/14 02:30] (current) – external edit 127.0.0.1
Line 11: Line 11:
 ==== Specs ==== ==== Specs ====
   * Intel Atom E3805 2x 1.33GHz   * Intel Atom E3805 2x 1.33GHz
-  * 2GB RAM (DDR3L) +  * 2GB RAM (DDR3L @ 1600MHz
-  * 8GB eMMC (Kingston+  * 8GB eMMC (Kingston W32508)
   * 2x Realtek RTL8101 at 10/100. Port 1 (eth0) supports PoE power input!   * 2x Realtek RTL8101 at 10/100. Port 1 (eth0) supports PoE power input!
   * [[https://www.silabs.com/documents/login/data-sheets/RS9113_Module_Family_Datasheet.pdf|SiLabs RS9113]] WiFi+Bluetooth over SDIO   * [[https://www.silabs.com/documents/login/data-sheets/RS9113_Module_Family_Datasheet.pdf|SiLabs RS9113]] WiFi+Bluetooth over SDIO
Line 42: Line 42:
   * 4 pin JST micro connector for ttyS0 (115200,8n1 for boot console)   * 4 pin JST micro connector for ttyS0 (115200,8n1 for boot console)
   * MiniPCIe connector (not soldered, likely needs additional hardware)   * MiniPCIe connector (not soldered, likely needs additional hardware)
 +  * Four switches exist inside the device (two 2 switch modules) but it is not yet clear exactly what they do. 
  
 No user upgradable RAM/storage. No user upgradable RAM/storage.
-==== Local Access ====+==== Local Console Access ====
 The 3002 was designed to be accessed entirely over a network, and has no end user ways to accessing a local console. Under the lid there is a four pin JST micro connector (same //physical// connector as Qwiic) that can be used to access ttyS0, which has console output on boot. This is a 1v8 UART running at 115200,8n1. The 3002 was designed to be accessed entirely over a network, and has no end user ways to accessing a local console. Under the lid there is a four pin JST micro connector (same //physical// connector as Qwiic) that can be used to access ttyS0, which has console output on boot. This is a 1v8 UART running at 115200,8n1.
  
edgegateway3002.1677262666.txt.gz · Last modified: 2024/11/14 02:30 (external edit)

Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki