wiki.millerjs.org

[Home] [Cat] [About] [Syntax] [Scraps]

[millerjs.org]

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====== NovAtel ProPak-V3-HP ======
The ProPack-V3 series is based on the OEMV-3 GNSS receivers from NovAtel. It is packaged into a few different form factors, the ProPack-v3 is a durable and ruggedized enclosure. 

The ProPack-V3 is available in many different configurations. The -HP variant is "L1/L2 GPS code positions and DGPS, OmniSTAR HP/XP/VBS, SBAS, 20 Hz"

==== Hardware ====

{{:novatel_propack_v3:propack-v3_generalspecs.png?600|}}

{{:novatel_propack_v3:propack-v3-comms-pinouts.png?600|}}

Yes, those are USB1.1 D+ and D- pins on the first COM port. I don't know how I feel about that.

{{:novatel_propack_v3:propack-v3-io-pinout.png?600|}}


==== Photos ====

{{gallery>:novatel_propack_v3:photos}}


==== Resources ====

  * [[https://novatel.com/support/previous-generation-products-drop-down/previous-generation-products/propak-v3-receiver|NovAtel ProPack-V3 Product Page]]
  * {{ :novatel_propack_v3:propakv3_product_sheet.pdf |ProPack-V3 DataSheet}}
  * {{ :novatel_propack_v3:oemv3_datasheet.pdf |OEMV-3 DataSheet}}
  * {{ :novatel_propack_v3:propack-v3_quick_start_guide.pdf |ProPack-V3 Quick Start Guide}}
  * {{ :novatel_propack_v3:oemv_family_installation_and_operation_manual.pdf |OEMV Family Installation and Operation Manual}}
  * {{ :novatel_propack_v3:oemv_family_firmware_reference_manual.pdf |OEMV Family Firmware Reference Manual}}
  * {{ :novatel_propack_v3:novatel_model_guide.pdf |NovAtel Model Guide}}

[Home] [Cat] [About] [Syntax] [Scraps] [millerjs.org]

[Home] [Cat] [About] [Syntax] [Scraps]

[millerjs.org]