quectel_lg290p
This is an old revision of the document!
Quectel LG290P
Configuration
Base
Rover
The default configuration of the LG290P is to operate in rover mode. The easiest way to enter this mode is to reset the unit to defaults.
$PQTMRESTOREPAR*13 $PQTMSRR*4B
The resulting sentences are sent at 10Hz and are quite dense, a baud rate of 460800 is recommended. If 10Hz data is not required (or the bandwidth is too great) the sentences can be slowed down using the $PQTMCFGMSGRATE command. GSA1) and GSV2) are by far the longest and consume the most bandwidth. If you want a 10Hz location stream, but don't need GSA/GSV at that rate, they can be individually slowed to 1Hz:
$PQTMCFGMSGRATE,W,GSA,1* $PQTMCFGMSGRATE,W,GSV,1*
Resources
- Sparkfun LG290P Guide - Useful for general LG290P specs and setup information.
quectel_lg290p.1737989704.txt.gz · Last modified: 2025/01/27 14:55 by millerjs