Differences

This shows you the differences between two versions of the page.

--- z-xtreme [2025/09/30 12:03] – [Docs/Files] millerjs
+++ z-xtreme [2026/05/26 13:39] (current) – [Useful Commands] admin
@@ Line 2: / Line 2: @@
 ==== Docs/Files ====
   * {{ :z-xtreme:zx_operations_and_reference_manual.pdf }}
+  * {{ :z-xtreme:z_family_technical_reference_630203-01_rev_d.pdf |}}
   * {{ :z-xtreme:opus_receiver_workflow.pdf }}
   * {{ :z-xtreme:z-xtreme-ze21_release_notes.pdf }}
   * {{ :z-xtreme:zx_system_guide_to_post-process_surveying.pdf |}}
+  * {{ :z-xtreme:zx-static-operation.pdf |}}
+  * {{ :z-xtreme:zx-data_download.pdf |}}
+  * {{ :z-xtreme:using_pcmcia_cards.pdf |}}
+  * {{ :z-xtreme:faq_z-xtreme_ze00.pdf |}}
   * {{https://github.com/robots/survey_gps/tree/master/ashtech|2019 WNRO Patched Firmware}}
@@ Line 12: / Line 17: @@
 ==== Useful Commands ====
 == Init ==
+Reset unit, set baud rates to 115200, and format internal an external storage
+  $PASHS,INI,9,9,9,9,3,0
+Set PCMCIA recording interval to 15 seconds
+  $PASHS,DRI,15
+Set raw data output to serial to 1 seconds
+  $PASHS,DOI,1
+Raw output on serial port B as binary streams
+  $PASHS,OUT,B,MBN,PBN,BIN
 ==== Photos ====
-{{gallery>:z-xtreme:photos}}
+{{gallery>:ashtech:z-xtreme:photos}}